Silicone Greases Product Search

Product: Chemplex 825 Silicone Grease (Vacuum Grease - Dielectric Grease)

Description: Chemplex 825 is a specially formulated grease like product containing selected silicone oils and inert silica fillers.  This stiff, tacky compound has excellent dielectric properties, oxidation resistance and water repellency.  It is essentially non-toxic and non-melting & retains its pliability even after extended service.  Chemplex 825 is resistant to a variety of chemicals and is compatible with most plastics and rubbers.  Chemplex 825 has broad temperature range of -40 to 400 º F (-40 to 204 º C) which allows for use even in the most harsh environments.  

Applications:

  • Moisture and electrical protections for ignition systems, electrical connectors and spark plug connectors

  • Dielectric compound for electronic applications.

  • Insulator protection to guard against flashover.

  • Excellent Vacuum Grease

  • Excellent general purpose dielectric grease.

  • For coating brake calipers during assembly

  • Excellent Marine Grade Silicone Grease

Complies with these regulations and specifications:

FDA 21 CFR 178.3570 for incidental food contact

Product: Chemplex 1381 Silicone Grease (Thermally Conductive/Heat Sink Grease) Product Search

Description: Chemplex 1381 Heat Sink compound is a silicone fluid based, grease-like material specially blended with fine thermally conductive metal oxide powders.  Formulation results in very high thermal conductivity, low bleed and excellent high temperature stability.  This highly viscous product will not harden, melt or dry out and will tenaciously adhere to metal surfaces even when exposed to high temperatures for extended periods of time.  

Applications:

  1. Use as interface to facilitate the transfer of heat from electrical device to heat sink or chassis.  

  2. Use on transistors, diodes, rectifiers and transformers.

  3. Moisture barrier for electrical and electronics applications.

  4. Excellent general purpose thermally conductive compound.

Complies with these regulations and specifications:

Meets MIL-C-47113

Product: JL33 Silicone Grease (Lithium Soap Silicone Bearing Grease)
Product Search

Description: JL33 is a premium silicone/lithium grease for use in a wide variety of applications.  Its low volatility and low temperature properties allow the product consistency to remain constant over a wide temperature range.  -70ºF to 400º F (-57ºC to 204ºC)  Product is excellent for ball and roller bearings under light loads; plastic and rubber parts; small gears and applications requiring oxidation resistant lubrication.  Since it has low torque requirements, JL33 is especially effective in equipment that must start in extremely cold areas.  

Applications:

  1. Lubrication for cryogenic and high temperature environments.

  2. Mainly a lubricant for low speed motors and timing mechanisms.

  3. Also used on ball bearings, starter clutches, fan motors, meters, small appliances and other instrumentation where a non-corrosive, chemically stable, water repellant material is needed.

  4. Suitable for valve lubrication.  

Complies with these regulations and specifications:

Meets MIL-G-14391 & A-A-59173 Type 2

Product:  Chemplex 710 Silicone Grease Product Search

Chemplex 710 is part of a large series of fine synthetic based materials each formulated with specially selected inert silica thickeners to enhance its physical and chemical properties. Smooth tacky and grease like, Chemplex 710 silicone compound is characterized by exceptional resistance to corrosive environments, acids and solvents. Chemplex 710 is resistant to a variety of chemicals and is compatible with most plastics and rubbers. Chemplex 710 has broad temperature range of -40 to 400°F (-40 to 204°C) which allows for use even in the most harsh environments.

Applications:

Chemplex 710 Silicone compound is resistant to oxidation, thermal degradation and a broad range of chemicals. Because it is inert to rubber and other elastomers, it is particularly useful for lubricating o-rings, gaskets and seals in pumps, mixers and valves. Electrical connectors, splices, terminations, switch gear, battery terminals, auto ignition components and a myriad of other electrical devices stay moisture sealed in this high dielectric medium.

Product: SU855 Silicone Grease (O-Ring Silicone Grease) Product Search

Description: DC55 is a soap-thickened grease based on a blend of diester and silicone fluids. It is designed for use in applications that require controlled rubber swell.

Applications:

  1. Controlled Rubber swell (o-rings)

  2. Because of its wide operating temperature range, oxidation resistance, hydraulic stability, and non-corrosive nature it can be used in aircraft, automobile, and pneumatic systems.

  3. Excellent general purpose lubricant for ball and roller bearings, motors, timing mechanisms, instrumentation, and other systems where a lubricant with long-term stability is desired. .

Complies with these regulations and specifications:

Meets MIL-G-4343C

Product Search

 

Product Catalog  Custom Packaging  Cross Reference Charts  Custom Silicone Formulations
News   Company Info   Contact Us   Main Page
Moreau Marketing & Sales

485 Glenn Link Road Lexington, NC 27295
  1-336-764-5232   Fax: 336-764-0941
moreau@Rmoreau.com
We look forward to serving your company.