111200 Purple Removable ScrewGrade™ Threadlocker

Description: This anaerobic is designed for locking fasteners smaller than 1/4" diameter. You will be able to remove this product from threaded parts with ordinary hand tools. Meets the following military spec.: MIL-S-46163A, Type II, Grade M. Compare to *Loctite 222.  

121200 Blue Removable NutGrade™ Threadlocker Product Search

Description: This medium strength anaerobic is designed to locking nuts or bolts a 1/4" in diameter or larger. Removes with normal hand tools. Meets the following Military specs:
MIL-S-46163A, Type II, Grade N & MIL-S-22473E.
Compare to *Loctite **242 & 243

131600 Red Permanent StudGrade™ Threadlocker Product Search

Description: 131600 is a high strength, controlled torque threadlocker that locks studs and bolts against severe vibration and shock resistance. Remove using heat. Meets the following Military specs: MIL-S-46163A, Type II, Grade O & MIL-S-22473E Compare to *Loctite 262

137000 Red Permanent High Temperature StudGrade™ Threadlocker
Product Search

Description: Heavy Duty threadlocker that locks and seals bolts and studs that will be subjected to temperatures up to 450 º F.  If this temperature range is not high enough, please take a look at our ultra high temperature thread sealant MMS-TC

140500 Red Permanent StudGrade™ Threadlocker Product Search

Description: Very high strength threadlocker designed for fasteners up to 1" in diameter. Meets the following MIlitary spec: MIL-S-43163A, Type I, Grade K.
Compare to *Loctite 271

146500 Red Permanent Heavy Duty StudGrade™ Threadlocker
Product Search

Description: This threadlocker is a very high strength, heavy duty, high viscosity anaerobic designed for fasteners over 1" in diameter with coarse threads. Meets MIL-S-46163A, Type I, Grade L. Compare to *Loctite 277

150012 Green Wicking Adhesive Sealant/Threadlocker Product Search

Description: This medium to high strength wicking adhesive works using capillary action: locks pre-assembled fasteners. Seals porosities in welds and hairline cracks in casting. Meets MIL-S-46163A, Type III, Grade R & MIL-S-22473E Compare to *Loctite 290

® ND Vibra-Tite, ND and ND Industries are registered trademarks of ND Industries, Inc.
* Loctite is a Registered Trademark of The Loctite Corporation
**242 is a Registered Trademark of The Loctite Corporation
™ StudGrade, NutGrade, ScrewGrade are trademarks of ND Industries, Inc.

 Product Search