Product Listing for Instant Adhesives- Cyanoacrylate Superglues

Surface Insensitive Cyanoacrylates

Contact us about Surface Insensitive Cyanoacrylates
(1-336-764-5232)
Description

The advanced performance series of Cyanoacrylates are a family of products that have been designed and manufactured to meet the demands of today’s product assembly requirements.

These adhesives are used in applications that require exceptionally fast cure speeds, difficult to bond substrates, and acidic surfaces. Wood, PVC surfaces that contain plasticizers and certain types of EPDM, etc.

This new generation of cyanoacrylates create exceptional bond strengths with excellent aging and weathering characteristics. Mil-A 46050 Type II. Colorless, transparent liquid with a useful temperature range of -65ºF to +200ºF. Full cure 8 hours. Tensile/Shear strength 2800-4200 psi.

Our surface insensitive cyanoacrylates come in a wide variety of viscosities to meet your cure speed and gap fill requirements. As a rule of thumb, high viscosity (thick) glues cure slower than lower viscosities, but they have a higher gap fill rate.

SI5 is 5 cps viscosity (very water like) with gap fill .002. Mil Spec Class 1. Typical fixture time < 5 seconds.

SI30 is 30 cps viscosity with gap fill .004. Mil Spec Class 1. Typical fixture time < 5 seconds.

SI120 is 120 cps viscosity with gap fill .005. Mil Spec Class 2. Typical fixture time < 8 seconds.

SI500 is 500 cps viscosity with gap fill .007. Mil Spec Class 2. Typical fixture time < 8 seconds.

SI1000 is 1000 cps viscosity with gap fill .008. Mil Spec Class 3. Typical fixture time < 8 seconds.

SI1500 is 1500 cps viscosity with gap fill .008. Mil Spec Class 3. Typical fixture time < 8 seconds.

SI2400 is 2400 cps viscosity with gap fill .009. Mil Spec Class 3. Typical fixture time < 8 seconds.

SI3200 is 3200 cps viscosity with gap fill .009. Mil Spec Class 3. Typical fixture time < 10 seconds.

SI4000 is 4000 cps viscosity with gap fill .009. Mil Spec Class 3. Typical fixture time < 10 seconds.

SI-Gel is 120,000 cps viscosity (thixotropic paste) with gap fill .010”. Useful on vertical services. Mil Spec Class N/A. Typical fixture time < 10 seconds

Features 
Applications

SI-Gel is particularly good at bonding coral.

Applicable Standards  
Other 
Stock Color

colorless

Stock Size
  • 2cc pipette ,
  • 28g (1oz) bottles,
  • 56g (2 oz.) bottles,
  • 454g (1 pound) bottles

SI-Gel is packed in:

  • 3 gram squeeze tubes,
  • 20 gram squeeze tubes,
  • 200 gram squeeze tubes
  • 300 gram caulking cartridges.

Special Packaging available upon request.

We can also color pigment our surface insensitive superglues. ( volume inquiries only)

TDS
MSDS
Cross Reference CACross.pdf
Contact us about Surface Insensitive Cyanoacrylates
(1-336-764-5232)