Description | This advanced performance series of Cyanoacrylates are a family of products that have been designed and manufactured to meet the demands of today’s product assembly requirements while at the same time reducing odor and blooming.
Standard Cyanoacrylates are generally eye and nose irritants. Low Odor / Low Bloom family of cyanoacrylates reduces the odors and fumes that cause irritation and the whitening effect around the bond line. (Sometimes called blooming.)
Colorless transparent liquid with a useful temperature range of -65ºF to +180ºF. Full cure 24 hours. Tensile Shear strength 1900-3000 psi. Our Low Odor/Low Bloom cyanoacrylates come in a wide variety of viscosities to meet your cure speed and gap fill requirements. As a rule of thumb, high viscosity (thick) glues cure slower than lower viscosities, but they have a higher gap fill rate.
LO5- 5 cps viscosity (very water like) with gap fill .002. Typical fixture time < 7 seconds.
LO50- 50 cps viscosity with gap fill .003. Typical fixture time < 7 seconds.
LO100- 100 cps viscosity with gap fill .005. Typical fixture time < 7 seconds.
LO500- 500 cps viscosity with gap fill .007. Typical fixture time < 7 seconds.
LO1000- 1000 cps viscosity with gap fill .008. Typical fixture time < 20 seconds
|
Features | Low ordor compared to most standard superglues
Low Blooming or whitening affect found in standard superglues
LO5 is especially well suited for using our pump spray applicators.
LO5 is also extensively used in coating 3-D printed prototype parts.
Greatly reduced long term yellowing. |
Applications | Coating and infiltating 3-D printed prototype parts
Assembly of ornamental or esthetic parts. |
Applicable Standards | |
Other | |
Stock Color | clear |
Stock Size | 2cc pipette , 28g (1oz) bottles, 56g (2 oz.) bottles, 454g (1 pound) bottles
Available in Bulk
Special Packaging available upon request.
|
TDS |
|
MSDS |
|
Cross Reference
|
CACross.pdf
|